8868体育

Overview of mesh belt furnace
High temperature mesh belt type heat treatment furnace is generally protected by muffle mesh belt will realize the continuous conveying of parts in the furnace sintering furnace. It is mainly use for sintering pow metallurgy products and reduction of metal powder and presintering, sinter or heat treatment process of electronic products in protective atmosphere or air, and is suitable for heat treatment of small parts. 
Maximum furnace temperature: 1150 ℃ ( metallurgy ), 750 ℃ ( catalysis ). 
The whole set of equipment consists of furnace body, mesh belt drive system and temperature control system. The furnace body consists of a feeding section, a presintering section, a sintering section, a slow cooling section, a water cooling section and a discharging section. Mesh belt transmission system consists of high temperature resistant mesh belt, transmission device, etc. 
The furnace body of the high-temperature mesh belt heat treatment furnace is formed by welding section steel and steel plates, and a through hearth is built by light foam refractory brick and aluminum silicate refractory fiber in the furnace shell, so that the heat storage of the furnace lining is reduced. Energy saving and the like.

Mesh belt kiln heat insulation structure
Heat preservation structure of mesh belt kiln for flue gas denitration honeycomb ceramic catalyst production;
Kiln length: 22m - 58m; Kiln width: 0.93 m ~ 1.5m.
Sintering temperature: 480 - 620 deg c; Maximum temperature: 750 ℃
Mesh belt kiln insulation material selection: standard ceramic fiber module + standard ceramic fiber blanket composite insulation
Furnace wall: 270 mm ceramic fiber module 289 + 30 mm backing blanket
Roof: 300 mm ceramic fiber module 289 + 50 mm backing blanket h

Technical advantage
Mesh belt heat treatment furnace insulation, roof insulation easily match the most suitable insulation thickness, keep the furnace wall and roof heat dissipation is the same, the outer surface temperature is consistent.
● the mesh belt furnace adopts full fiber lining, which reduces the heat storage and thermal inertia of the furnace wall, shortens the heating time, improves the control precision, reduces the temperature rise on the surface of the furnace shell, reduces the heat loss, improves the thermal efficiency, and achieves the purpose of high efficiency and energy saving.
Low mesh belt kiln insulation furnace all adopt fiber structure, good refractory fiber masonry, good thermal insulation, try to reduce the temperature of the roof steel structure to reduce deformation.