8868体育

Nano heat insulation roll series:
Nano heat insulation roll jsgw - 950
Nano heat insulation roll jsgw - 1050
Nano heat insulation roll jsgw - 1100
Product description
The nano heat insulation roll is formed by adopting light, inorganic nano SiO 2 and ceramic fiber with extremely low thermal conductivity as raw materials and aluminum foil with high reflectivity as a bottom layer material, adopting a single-layer composite structure to be continuously coated and matched with a pressing and baking process, and the thermal conductivity of the nano thermal insulation roll is smaller than that of static air, and the thermal insulation performance of the nano thermal insulation roll is about 4 - 6 times better than that of the traditional thermal insulation material, so the nano thermal insulation roll is the thermal insulation material with the best performance so far.
The nano heat insulation roll has ultra-low thermal conductivity and can greatly save energy compared with the traditional thermal insulation material, and the diameter of the nano heat insulation roll is 150 mm.. Temperature of 600 degrees of pipeline, for example, in the use of thickness is only one third of the thickness of the traditional mineral wool, per meter of pipeline save 1400 degrees of electricity per year, the total length of 1000 meters of pipeline save energy about 1.4 million degrees of electricity per year.
Characteristics and functions
High temperature resistance - long-term use temperature of 400 ~ 1000 degrees
Thermal conductivity - 2 ~ 10 times lower than the conventional thermal insulation material, only 0.052 w / m k at 800 degrees
Durability - can be used as insulation permanent layer, service life of more than 5 ~ 10 years
Safety and environmental protection - pure non-polar material combination, good thermal stability, no release of any harmful substances
Economic analysis - the price is lower than 50 % of foreign similar products, 10 ~ 30 % energy saving than conventional materials
Hot and cold surface temperature self-examination table
The nano thermal insulation roll has excellent thermal insulation performance, because the thermal conductivity is very small, only 1 / 3 to 1 / 4 of that of the traditional thermal insulation material, therefore, the thermal insulation thickness can be very thin under the condition of ensuring the same cold surface temperature, that is to say, under the condition that the thermal insulation thickness cannot be too thick, the cold surface temperature can be reduced to the minimum as far as possible, and the thermal insulation effect under the same condition is different due to the complexity and variability of the field thermal conditions.
Application areas:
Metallurgy: ladle, ladle, tundish, converter, torpedo ladle
Machinery: industrial furnace, electric furnace, furnace door, furnace cover
Automobile: engine heat shield, catalytic exhaust pipe
Petrochemical: cracking furnace, conversion furnace, heating furnace
Power: boilers, steam turbines, pipelines
Building materials: ceramic furnace, rotary furnace
Use effect:
Reduce that thickness of the heat insulation layer
Since that thickness of the thermal lay can be greatly reduced, the heat insulation device can be miniaturize and the volume of the device can be increased
Reduced heat storage
The heat storage of the heat insulation layer is reduced, and the heating time of the furnace is greatly shortened, so that not only energy is saved, but also the Tianjin special nano microporous heat insulation material can achieve the effects of improving productivity and being easy to perform temperature control.
Reduce heat dissipation
Because the heat insulation effect can be achieved by using a thinner nano microporous heat insulation material, the heat dissipation surface area can be reduced, and the heat loss can be greatly reduced. Therefore, the surface temperature of the furnace can be reduced and the working environment can be improved.
Temperature homogenization
The invention has the effect of reducing heat loss, can realize the homogenization of the temperature to the maximum extent, and can lead the metal solution, the glass solution and the heat treatment product of the kiln to be more uniform in temperature and improve the product quality as a result.